However, we recommend that you use an assistant to hold the door panel steady while you disconnect the wiring on the panel. Then set the switch panel down in a safe place like the car seat. It is connected to the door arm by clips that pop off. Use one hand to hold it in place while you use the other hand to screw in the bolts. They may be under trim covers, depending on the year and model of the F-150. Open the passenger door and use the socket set to remove any fasteners you may find in the door panel.
The driver's side mirror on the Ford F-150 pickup truck is large and protrudes significantly from the side of the truck. The nuts that secure the mirror to the door frame will now be visible, but before removing them with a suitable socket, disconnect all the wiring leading into the mirror. Pro Tip Put a little piece of tape or some plumber's putty on the socket to keep the nut from falling out of it and falling down into the door panel. Remove all securing screws and place them aside. All you need are some basic tools, some mechanical aptitude, and about an hour of free time. Various pieces of trim cover all the fasteners and any wiring harnesses. Step 3 - Remove two door screws You will find the first screw behind the reflector that you just removed.
Install the door panel by inserting the hooks into the door frame. It doesn't require the help of anyone else and you can perform it in under an hour. Step 3: Disconnect all wiring If you have an assistant, let the assistant hold the door panel steady while you reach in behind the panel to disconnect the wiring for the speakers, power windows, and other equipment where fitted. Burco offers an industry leading 3,500+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. Special precautions required when replacing a Ford F150 mirror No special precautions are required beyond making sure that you have the correct replacement mirror at hand, and that you take some care to avoid damaging the door panel when you are removing screws, fasteners, and trim clips. The old side mirror has been removed.
You can now disconnect it from its wiring. No long waits, going without a vehicle or paying for a costly mirror head assembly. All connectors will only fit on their matching counterparts. Replacing a broken mirror on your Ford F-150 or F-250 Super Duty is a matter of accessing the mirror by removing the door panel and disconnecting a few wires. Burco replacement automotive mirrors are top quality and deliver the performance, looks and clarity needed for optimal viewing. Time required to replace a Ford F150 mirror. Removing reflector cover for door lamp.
Removing the side mirror assembly. With all the retaining nuts removed, pull the mirror away from the door and place it aside. Shape, functionalities, and size must be verified prior to choosing the correct mirror. Failure to do so can result in your receiving the incorrect glass. If the mirror mounting studs are now visible, move to step five.
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. There is a connector on the back that you need to tug gently on. You may need to use a small flat-bladed screwdriver the unseat the securing clips on some electrical connectors, but do not use excessive force. Slide the trim removal tool in between the bottom edge of the panel and the door frame, and use a gentle levering action to unseat the clips. Step 5: Compare the old and new mirrors. Popping off door switch panel.
Feeding the new side mirror's wiring into the door panel. You may also need to remove the screws that secure trim panels under door pull handles. If you need more information, or need to see practical demonstrations of the steps outlined in this guide, watch the video down below. Make sure to share this post on social media if you have found it helpful! Although the mirror is spring-loaded to reduce damage caused by impact with the mirror cover, the mirror glass inside the large plastic cover is prone to cracking when hit. Be careful not to scratch or nick the trim with the tip of the screwdriver. Disconnecting the old side mirror.
Time required varies from model to model and your skill level, but a side view mirror replacement should not take longer than about 45 minutes. When you replace a broken automotive side-view mirror with a Burco replacement automotive mirror, congratulate yourself for being savvy enough to locate an automotive replacement mirror that is as good as, or better than your original automotive mirror glass. After connecting the mirror, be sure to reconnect the wires, close up the casing and return the speaker to it's rightful place. It features a Flat surface, Drop Fit fit type, and measures 6. It needs to be removed because it covers the mirror nuts.
. Step 2: Unseat all retaining clips With all screws removed, the door panel will still be secured to the door frame by plastic clips around the edges of the panel. Lift the door panel up and away from the door. Do not pull on the panel more than what is required to disconnect wiring; any force at this point could break wiring, or dislodge connections in the power window control module. If not, fit a bulb before fitting the mirror to the door. This article applies to the Ford F-150.